Selecting the right polypropylene strapping requires more than checking its nominal dimensions or price. Key specifications—including material composition, width, thickness, coil weight, roll length, grammage, and tensile strength—determine its performance, material efficiency, and suitability for different packaging applications.
This guide outlines the main specifications and explains how they relate to one another.
1. Material Types
Polypropylene strapping is generally manufactured using three material configurations: virgin material, recycled material, and multi-layered material commonly referred to as “sandwich” material.
Their general quality hierarchy is:
Virgin material > Recycled material > Sandwich material
| Specification | Virgin Material | Recycled Material | Sandwich Material |
|---|---|---|---|
| Raw material | New PP resin | Reprocessed PP | Multi-layered composition, often with high calcium carbonate filler content |
| Tensile strength | High | Moderate | Low |
| Weight per unit length | Generally lower | Generally higher | Generally higher |
| Roll length at equal net weight | Longer | Shorter | Shorter |
| Initial price | Higher | Moderate | Lower |
| Overall value | High | Moderate | Low |
Virgin material generally provides the highest tensile strength, lower weight per unit length, and more consistent mechanical performance.
Recycled material offers a lower-cost alternative, although tensile strength and dimensional consistency depend on the quality and composition of the recycled feedstock.
Sandwich material often contains excessive calcium carbonate filler. This can increase thickness and weight per unit length while reducing tensile strength. Although its initial purchase price is lower, its shorter roll length and poorer mechanical performance can result in higher overall packaging costs. It is therefore not recommended for procurement where reliable strapping performance is required.
For product details, see our polypropylene strapping.
2. Dimensional Specifications
2.1 Width
Width is the distance across the flat surface of a strapping band, measured in millimeters (mm).
- Typical range: 5–19 mm
- Common specifications: 5, 9, 12, 15, and 19 mm
- Width tolerance: ±0.5 mm
For example, a band with a nominal width of 12 mm is within tolerance when its actual width measures 11.5–12.5 mm.
Width influences tensile strength, but the relationship varies by material type:
- Virgin material: At identical thickness and comparable material properties, wider bands generally provide higher tensile strength.
- Recycled material: Narrower bands may sometimes exhibit higher tensile strength than wider ones, depending on material composition and manufacturing conditions.
Virgin-material bands generally offer more consistent performance.
2.2 Thickness
Thickness is the distance between the two flat surfaces of a strapping band, measured in millimeters (mm).
- Typical range: 0.35–1.5 mm
- Common specifications: 0.47, 0.55, 0.60, 0.80, and 0.90 mm
- Thickness tolerance: ±0.05 mm
Typical application ranges:
- Machine application: Approximately 0.35–1.0 mm
- Manual application: Approximately 0.8–1.5 mm
These ranges are indicative; actual suitability depends on the strapping equipment and application requirements.
Thickness, together with width, determines the band’s cross-sectional area. Both dimensions influence tensile strength and should be evaluated together rather than independently.
See our automatic strapping machine applications for more information about equipment compatibility.
3. Coil Weight and Roll Length
3.1 Total Coil Weight
Coil weight refers to the weight of the strapping material in one roll.
- Unit: kg
- Weight tolerance: ±2%
For accurate comparisons, distinguish between net material weight and gross weight. Gross weight may include the core and packaging, whereas net weight refers to the strapping material itself.
3.2 Roll Length
Roll length refers to the total length of strapping wound onto one coil.
- Unit: meters (m)
- Length tolerance: ±1%
At the same net coil weight, a lower weight per unit length means more meters of strapping per roll.
Material composition, width, and thickness all influence the total roll length.
3.3 Grammage (Weight per Unit Length)
Grammage refers to the weight of strapping material per meter of length, expressed in grams per meter (g/m).
It is calculated as:
Grammage (g/m) = Net Coil Weight (g) ÷ Roll Length (m)
For example:
- A 10 kg roll containing 2,000 m of strapping has a grammage of 5 g/m.
- A 10 kg roll containing 1,600 m of strapping has a grammage of 6.25 g/m.
At equal net coil weight, lower grammage means greater roll length.
However, lower grammage does not necessarily indicate better quality. Tensile strength and application requirements must also be considered.
4. Tensile Strength
Tensile strength indicates the maximum tensile stress a material can withstand before breaking. It is commonly expressed in megapascals (MPa).
For packaging applications, buyers may also encounter breaking force, which indicates the force required to break a complete strapping band. It is commonly expressed in newtons (N) or kilograms-force (kgf).
These are different measurements and should not be used interchangeably.
Tensile performance is influenced by:
- Raw material composition
- Band width and thickness
- Manufacturing process
- Material formulation
When comparing products, evaluate tensile performance under the same testing conditions and compare bands with equivalent nominal dimensions.
5. How to Evaluate Strapping Specifications
A reliable comparison should consider the following parameters together:
| Parameter | What to Check |
|---|---|
| Material | Virgin, recycled, or sandwich |
| Width | Nominal dimension and ±0.5 mm tolerance |
| Thickness | Nominal dimension and ±0.05 mm tolerance |
| Coil weight | Net weight and ±2% tolerance |
| Roll length | Actual meters and ±1% tolerance |
| Grammage | Weight per meter |
| Tensile strength | Measured performance and test conditions |
Do not evaluate a product solely by its price per roll. Compare net material weight, actual roll length, grammage, and tensile performance to determine its material efficiency and cost per packaged load.
Conclusion
The key to selecting suitable polypropylene strapping is understanding the relationship between material composition, dimensions, coil weight, roll length, grammage, and tensile strength.
A proper evaluation should focus on measurable specifications and actual performance rather than nominal dimensions or purchase price alone. Comparing these parameters under consistent conditions helps buyers select reliable strapping materials and control overall packaging costs.